2. Installing the Parrot USB Dongle (Windows 2000, XP & Vista)
If your PC is already
Bluetooth
compatible, the use of the Parrot USB Dongle and the installation
procedure below are not necessary.
System requirements:
- Min. processor speed 200 MHz
- RAM: Min. 64 MB, recommended 128 MB
- Free USB port (USB 1.1 and 2.0 standards)
- Windows® 2000, XP or Vista
1. Insert the software installation CD in the CD-ROM drive of the computer.
> If you are using Windows 2000 or Windows XP, the installation process will start automatically.
> If you are using Windows Vista, click on Execute Setup. exe.
> If the installation does not start automatically, double click on the drive letter associated to your
CD-ROM drive and double click on Setup.exe.
2. Click on Install Parrot Audio Suite.
> The
Bluetooth
installation window is displayed.
3. Click OK if you wish to use the Parrot USB Dongle.
> The «InstallShield Wizard» software will then install the various functions available with the Parrot
USB Dongle.
4. Follow the instructions on the screen.
> During the installation process you may be asked to connect the Parrot USB Dongle. If the dongle
is not yet plugged into the computer, you must connect it to a USB 1.1/2.0 - compatible port on your
PC or laptop. Then click on OK to continue. If you want to continue the installation without
connecting the
Bluetooth
peripheral, click on Cancel.
5. You will then see a message confirming that the driver has been installed.
> Click on Finish to end the installation process.
IMPORTANT: THE USB ADAPTER IS SENSITIVE TO STATIC ELECTRICITY. THE HIGHLY SENSITIVE
ELECTRICAL ADAPTER COMPONENTS CAN BE DAMAGED BY STATIC. TO PROTECT THE PERIPHERAL,
ALWAYS TOUCH THE METAL CASE OF THE COMPUTER BEFORE HANDLING THE USB ADAPTER. THIS
ENSURES THAT YOU DISCHARGE ANY STATIC ELECTRICITY. YOU SHOULD AVOID ANY CONTACT WITH
THE METAL CONNECTOR WHEN HANDLING THE USB ADAPTER. VERY DRY WEATHER OR SIMPLY
WALKING ACROSS THE FLOOR CAN CAUSE A STATIC CHARGE TO BUILD UP ON YOUR BODY.
3. Connecting the Parrot DS1120 to a PC (Windows 2000, XP & Vista)
- If your computer isn’t compatible with the
Bluetooth
technology, refer to the « Installing the Parrot
USB Dongle » section.
- To connect easily your computer to the Parrot DS1120, use the Parrot Audio Suite software. If you
have not installed this software yet, you can find it on the CD-ROM provided or download it from our
website www.parrot.com, in the Support section.
