manualshive.com logo in svg

Parr Instrument Company 6300, Руководство по эксплуатации

Поделиться
Скачать
Parr Instrument Company 6300 Скачать руководство пользователя страница 8

P

REFACE

P a r r   I n s t r u m e n t   C o m p a n y

8

E

XPLANATION

 

OF

 S

YMBOLS

I

On Position

O

Off  Position

~

Alternating Current (AC)

This CAUTION symbol may be present on the Product Instrumentation 
and literature. If  present on the product, the user must consult the 
appropriate part of  the accompanying product literature for more 
information.

ATTENTION, Electrostatic Discharge (ESD) hazards. Observe precautions 
for handling electrostatic sensitive devices.

Protective Earth (PE) terminal. Provided for connection of  the protective 
earth (green or green/yellow) supply system conductor.

Chassis Ground. Identifies a connection to the chassis or frame of  the 
equipment shall be bonded to Protective Earth at the source of  supply in ac-
cordance with national and local electrical code requirements.

Earth Ground. Functional earth connection.  This connection shall be 
bonded to Protective earth at the source of  supply in accordance with 
national and local electrical code requirements.

I

NTENDED

 U

SAGE

If  the instrument is used in a manner not specified by 
Parr Instrument Company, the protection provided by 
the equipment may be impaired.

C

LEANING

 & M

AINTENANCE

Periodic cleaning may be performed on the exterior 
surfaces of  the instrument with a lightly dampened 
cloth containing mild soap solution. All power should 
be disconnected when cleaning the instrument.

There are no user serviceable parts inside the product 
other than what is specifically called out and discussed 
in this manual. Advanced troubleshooting instructions 
beyond the scope of  this manual can be obtained by 
calling Parr Instrument Company in order to determine 
which part(s) may be replaced or serviced.

S

AFETY

 I

NFORMATION

To avoid electrical shock, always:

Use a properly grounded electrical outlet of  correct 

1.

voltage and current handling capability.
Ensure that the equipment is connected to electrical 

2.

service according to local national electrical codes. 
Failure to properly connect may create a fire or 
shock hazard.
For continued protection against possible hazard, 

3.

replace fuses with same type and rating of  fuse.
Disconnect from the power supply before 

4.

maintenance or servicing.

To avoid personal injury:

Do not use in the presence of  flammable or 

1.

combustible materials; fire or explosion may result. 
This device contains components which may ignite 
such material.
Refer servicing to qualified personnel.

2.

Содержание 6300



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды