manualshive.com logo in svg

Parr Instrument Company 6300, Руководство по эксплуатации

Поделиться
Скачать
Parr Instrument Company 6300 Скачать руководство пользователя страница 65

M

ENU

 O

PERATING

 I

NSTRUCTIONS

6300

A

w w w . p a r r i n s t . c o m

65

Moisture as Received Entry Mode:

This key steps through the options for entering the 
moisture as received correction value either manually or 
through the touch screen or automatically through the 
balance (USB) port.

Auto Preweigh ID Controls:

Accesses sub-menu, used to automatically assign 
Sample ID numbers when a series of  samples are pre 
weighed ahead of  the time they are actually tested.

Automatic Preweigh ID.

• 

 ON/OFF toggle for this 

feature.

Automatic Preweigh ID Prefix.

• 

 An entry here will 

be used as a prefix for all pre-weigh sample IDs.

Next Automatic Preweigh ID Number.

•

Shows the 

next Sample ID which will be assigned and is 
used to enter the beginning Sample ID of  any 
series

Automatic Preweigh ID Increment.

• 

 Establishes the 

increment between samples.

R

EPORTING

 C

ONTROLS

 M

ENU

Report Width:

Toggle this key to set the column width of  the printer 
to either 40 or 80 columns.  Select 40 when the 1758 
Printer is used.

Automatic Reporting:

Toggles the automatic reporting ON/OFF.  When ON, 
preliminary reports will be generated at the conclusion 
of  the test and final reports will be generated as soon 
as all of  the thermochemical corrections are available.  
When OFF, reports will only be generated by selecting 
the REPORT key.

Automatic Report Destination:

Toggles to direct the reports to the Printer or the screen 
display.

Individual Printed Reports:

When set to ON, will generate header information for 
each report printed.  In the OFF position, only one 
header will be printed for a series of  tests.

Edit Final Reports:

When set to ON, enables the user to revise sample 
weight and thermochemical corrections of  finalized 
reports from the report menu.

Recalculate Final Reports:

When set to ON, causes a recalculation of  stored final 
reports using calibration data and menu settings cur-
rently in the Calorimeter.

Содержание 6300



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды