Parmco HX-1-6NF-CER, Инструкция по установке и эксплуатации

Страница: 18 / 19

16
Connec
ti ng the hob to the mains power supply
The power supply should be connected in compliance with the relevant local standards.
1. If the cable is damaged or needs replacing, the opera ti on must be carried out by a
quali fi ed technician with dedicated tools to avoid any accidents.
2. The installer must ensure that the correct electrical connec ti on has been made and that it
is compliant with safety regula ti ons.
3. The cable must not be bent or compressed.
4. The installer must use the supplied power cord.
Recommended
type of
connection lead
CONNECTION DIAGRAM
Caution! Voltage of heating elements 220-240V
Caution! In the event of any connection the safety
Wire must be connected to the E terminal.
For 220-240V earthed one-phase connection, bridges
connect L terminals and terminals, safety wire to
E
N
L
①
②
④
⑤
①
②
④
⑤
TERMINAL BOARD
WARNING
Close the cable clamp after making the
electrical connection. Close the
terminal board cover by twisting it down.