Parmco HX-1-6NF-CER, Инструкция по установке и эксплуатации

Страница: 17 / 19

15
Inser
ti ng and fi xing the hob
Before inser ti ng the hob into the work surface, place the adhesive seal around the underside edge
of the hob. It is important to fi x the seal evenly without gaps, to prevent liquids from seeping
underneath the hob.
1. Turn the hob upside down (ensure the surface will not scratch the ceramic glass).
2. Place the gasket around the bo tt om edge of the hob.
3. Screw one end of the fi xing brackets into the holes on the underside of the hob
.
4. Place the hob into the work surface cutout, so it is si tti ng fi rmly on the surface.
5. Adjust the posi ti on of the brackets to suit the thickness of the work surface.
6. Screw the hob to the underside of the work surface using the other end of the fi xing
brackets alread y atta ched to the hob.
Cau ti ons
• The hob must be installed by quali fi ed personnel. Never conduct the opera ti on by
yourself.
• The hob shall not be mounted to cooling equipment, dishwashers and rotary dryers.
• The wall and induced hea ti ng zone above the work surface shall withstand heat.
• To avoid any damage, the benchtop and adhesive must be resistant to heat.
•
A steam cleaner is not to be used for cleaning the product.
1
-
worktop
2 1 3
4
5
2
-
screw
3
-
bracket
4
-
hob
5
-
hob seal
a
Worktop
Fixing bracket
Screw
Ventilation slot ≥ mm30
15 MIN