Parmco HX-1-6NF-CER, Инструкция по установке и эксплуатации

Страница: 15 / 19

13
Installa tion
Selec
ti on of installa ti on equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installa
ti on and use, a minimum of 50mm space shall be preserved
around the hole.
Be sure the thickness of the work surface is at least 40-50mm. Please select
heat-resistant work surface material to avoid larger deforma
ti on caused by the heat
radia ti on from the hotplate.
When installing the hob over drawers, a board must be installed 10mm underneath the
hob. The board must be made of suitable heat resistant materials.
A B C D E F
564mm
494mm 50mm min 50mm min 50mm min 50mm min
Make sure the hob is well ven
ti lated and the air inlet and outlet are not blocked.
Dear Installer:
Please a ffi x data label provided on the adjacent cupboard near
the appliance for future reference. Thank you.
564mm (A)
494mm (B)
50mm mini
(D)
50mm mini
(C)
50mm mini
(F)
50mm mini
(E)