Parmco HX-1-6NF-CER-T, Инструкция по установке и эксплуатации

Страница: 21 / 23

18
Inser
ti ng and fi xing the hob
Before inser ti ng the hob into the work surface, place the adhesive seal around the underside edge
of the hob. It is im portant to fi x the seal evenly without gaps, to prevent liquids fro m s eeping
underneath the hob.
1.
Place the gasket around the bo tt o m edge of the hob.
2. Place the hob in the work surface cutout, so the hob is si tti ng fi r m ly on the surface.
3. Secure the hob to the underside of the work surface using the fi xing brackets
supplied.
Screw one end of the bracket to the holes on the underside of the hob.
Adjust the posi
ti on of the brackets to suit the thickness of the work surface.
Secure the other end of the bracket to the underside of the work surface, in order to
secure the hob into posi
ti on.
Cau ti ons
• The hob m ust be installed by quali fi ed personnel. Never conduct the opera ti on by
yourself.
• The hob shall not be m ounted to cooling equip m ent, dishwashers and rotary dryers.
• The wall and induced hea ti ng zone above the work surface shall withstand heat.
• To avoid any d am age, the benchtop and adhesive m ust be resistant to heat.
•
A ste am cleaner is not to be used for cleaning the product.
1
-
worktop
2
1 3
4
5
2
-
screw
3
-
bracket
4
-
hob
5
-
hob seal
a
Worktop
Fixing bracket
Screw
Ventilation slot ≥ mm30
15 MIN