Parkside XQ 600, Руководство по эксплуатации и технике безопасности

Страница: 12 / 14

Commissioning
DUO-START function / Reduced idling rotation speed:
The appliance is fitted with a reducer for the rotation
speed when idling.The full motor performance resp.
the preselected rotation speed becomes available
with the additional activation of a DUO-START switch.
j
Activate either the Front switch
DUO- START
P
or
the Hand switch
DUO- START
Q
(see Figs. A, B, C).
This makes possible a gentler touch down onto the
work piece.
Note:
The front switch
DUO- START
P
springs back
into the starting position on being released.
Changing sanding sheets
m Warning!
Before carrying out work on the
appliance, always remove the plug from the power
socket.
The rotary sander is fitted with a velcro rapid attach-
ment, making possible a quick and easy exchange
of sanding sheets.
Note: Before securing a new sanding sheet
O
,
remove all dust and dirt from the sander plate
I
.
j
Ensure that the openings in the sanding sheet
O
concur with the boreholes of the sanding plate
I
.
Dust suction
m Warning! Fire hazard!
A risk of fire exists when
working with electrical appliances that have a dust
collection box or can be connected to an external
collection unit via a dust suction adapter! Under un-
favourable conditions, such as flying sparks, grinding
of metal or metal remnants in wood, the wood dust
in the dust sack (or in the dust sack of a vacuum
cleaner) can ignite.This can happen especially if the
wood dust has paint particles on it or is mixed with
other chemical substances and the material being
sanded is hot after extensive working. You should
therefore avoid an overheating of the items being
sanded, as well of as the appliance itself, and al-
ways empty the dust collection box or the dust bag
of the suction unit before work pauses.
Wear a dust protection mask!
m Warning! Before carrying out work on the
appliance, always remove the plug from the power
socket.
Installing the suction ring:
The suction ring
U
makes possible an optimal dust
suction.
j
Place the suction ring
U
in the housing guide.
Close the clamp bracket on the housing rear side.
Dust suction with the dust collection box:
j
Slide the dust collection box
R
onto the adaptor
opening on the appliance rear side.
Emptying the dust collection box:
j
Press the release buttons
Y
on both sides, then
remove the dust collection box
R
from the
appliance.
Note: To maintain an optimal suction performance,
empty the dust collection box
R
regularly.
Adapter for external suction (Fig. D)
Connection:
j
Slide the adaptor for external suction
{
exactly
and completely onto the adapter opening on the
appliance rear side.
j
Slide the tube of an authorised dust collection
unit (e.g. a workshop vacuum cleaner) onto the
adaptor for external suction
{
.
Removal:
j
Remove the tube of the dust collection unit from
the adaptor for external suction
{
.
j
Press both release buttons and remove the
adaptor for external dust collection
{
from the
appliance.
Selecting rotation speeds
and sanding sheets
Removal rate and surface quality
The removal rate and the surface quality are deter-
mined by the rotation speed and the gritting of the
sanding sheet.
10 GB/IE