GB
MT
33
State on delivery
• Motor head (pre-assembled)
• Flat pleated filter (pre-assembled)
• Holder (Power cord) (not assembled).
Tools required
• Phillips screwdriver PH2
Holder (Power cord) assembly
(Fig. A)
1. Insert the holder (27) for the power
cord into the receptacle on the back of
the motor head (12).
2. Fasten the holder (27) for the power
cord with the screws. The screws are
pre-assembled in the holes of the hold-
er.
Fitting and removing a bag
WARNING!
This appliance contains
dust that is harmful to health. Emptying
and maintenance operations, including
the removal of dust collection containers,
must only be carried out by profession-
als wearing appropriate protective equip-
ment. Do not operate without the com-
plete filtration system.
Overview
The appliance has the following bags:
•
Fleece filter bag (21)
• Dry vacuuming
• Suction of harmful substances to-
gether with the foil bag.
•
Foil bag (24)
• Dry vacuuming
• Suction of harmful substances to-
gether with the fleece filter bag.
• When vacuuming dust class H fabrics,
use the fleece filter bag
and
the foil
bag.
Fitting a foil bag
(Fig. B)
WARNING!
This bag is not a toy.
To avoid danger of suffocation, keep this
plastic bag away from babies and chil-
dren. The bag could adhere to the mouth
and nose and obstruct breathing. Do not
use this bag in cribs, beds, prams or play
pens.
1. Remove the motor head (12).
2. Remove any bags present in the dirt
container (15).
3. Place the foil bag (24) in the dirt con-
tainer (15) with the opening facing for-
wards.
4. Pull the opening of the foil bag (24)
inside the dirt container (15) over the
suction connection (19). The sealing
ring (22) at the opening of the foil bag
must lie between the webs (34) on the
suction connection.
5. Make sure that the foil bag (24) is
completely against the inner walls of
the dirt container (15).
6. Fold the rest of the foil bag (24) over
the edge of the dirt container (15).
7. Perform one of the following activities:
•
see Installing the fleece filter bag
•
Assembling the motor head,
p. 32
Installing the fleece filter bag
(Fig. B)
1. Remove the motor head (12).
2. Perform one of the following activities:
• Remove any bags present in the dirt
container (15).
• If you wish to vacuum hazardous
substances:
see Fitting a foil bag
3. Place the fleece filter bag (21) in the
dirt container (15) with the opening fa-
cing forwards.
4. Pull the opening of the fleece filter bag
(21) inside the dirt container (15) over
the suction connection (19). The seal-
ing ring (22) on the fleece filter bag
opening must fully surround the con-
nector (34) on the suction connection.
Содержание PPWD 30 A1
