GB
MT
35
Operation
Before operation
• The vacuum cleaner is equipped with
volume flow monitoring. The volume
flow monitoring is fixed at a value of
20 m/s, regardless of the position of
the volume flow controller (2). If this
value is undershot, e.g. due to accu-
mulated dirt in the suction hose, a full
safety filter bag or a clogged resp.
missing flat pleated filter, an acoustic
warning signal sounds.
Remedy
• Increase the volume flow with the
volume flow controller (2).
• Add secondary air with the air con-
trol (32).
• Remove blockages in the suction
hose and accessories.
• When operating the vacuum cleaner,
make sure that the castors (17) on the
vacuum cleaner are locked with the
parking brakes (18). This protects the
vacuum cleaner from rolling away unin-
tentionally. Test the castors for function
before using them on the relevant sur-
face.
• Inform yourself about the valid regula-
tions/laws regarding the handling of
hazardous dusts in your country.
• The vacuum cleaner may be used for
vacuuming and extracting the following
materials: Dusts with an exposure limit
value < 0.1 mg/m³
• The vacuum cleaner must not be used
in rooms where there is a risk of explo-
sion.
• Only use the appliance socket for the
following purpose: Connecting mains-
operated power tools in a dry environ-
ment.
Dry vacuuming
Switching on
1. Set a volume flow with the volume flow
controller (2).
2. Set the on/off switch to
ON.
Switching off
1. Set the on/off switch to
OFF.
2. Decontaminate the appliance if neces-
sary.
Suction tool
Notes
• If possible, use the handle (33) to con-
nect the power tool. You can then add
secondary air with the air control (32),
if required
• If the exhaust air is returned to the
room, there must be a sufficient air ex-
change rate
L
in the room. In order to
comply with the required limit values,
the recirculated volume flow must not
exceed 50% of the fresh air volume
flow (room volume
V
R
× air change
rate
L
W
). Also observe national and re-
gional regulations.
Switching on
1. Connect the suction opening of the
power tool to the appliance.
2. Connect the power tool to the appli-
ance:
• Power tool with mains connection:
Insert the mains plug of the power
tool into the appliance socket (1).
Power tool with smart battery: In the
Parkside app, connect the Smart
Battery to the device.
3. Set a volume flow with the volume flow
controller (2).
4. Set the on/off switch to
AUTO.
Switching off
1. Set the on/off switch to
OFF.
Содержание PPWD 30 A1
