Parkside PEH 30 C3, Оригинальное руководство пользователя

Страница: 11 / 27

PEH 30 C3
GB
│
IE
│
NI
│ 7 ■
External extraction:
When using dust extraction systems, e .g . a work-
shop extractor, it may be necessary to use the
adapter for external extraction . The vacuum
cleaner must be suitable for the material being
processed .
Connecting:
♦ Push the adapter for external extraction
firmly into the chip ejector .
♦ Push the hose of a suitable dust extraction ap-
pliance (e .g . a workshop vacuum cleaner) onto
the chip ejector (or the adapter for external
extraction , if required) .
Removal:
♦ Pull the hose of the vacuum cleaner off the chip
ejector or the adapter .
♦ Pull the adapter for external extraction off .
Parking shoe (see fig . B)
The parking shoe allows you to put down the
appliance without risking damage to the work-
piece . While working, the parking shoe is
flipped up and rear part of the plane sole is
exposed .
Planing
CAUTION! RISK OF KICKBACK!
Always switch the appliance on before applying
it to the workpiece .
♦ Set desired cut depth .
♦ Switch the appliance on .
♦ Place the appliance with the front part of the
plane sole on the workpiece .
♦ Move the appliance with straight, even motions
over the workpiece .
♦ Push forward slowly and do not exert excessive
pressure on the plane sole . Excessive speed
reduces the surface finish and can lead to a jam
in the chip ejector .
Chamfering edges
The V grooves in the front plane sole allow
easy chamfering of workpiece edges .
♦ Use the V groove that corresponds to the chamfer
width required .
♦ Place the planer with the V groove onto the
workpiece edge and guide it forwards .
Using the rip fence
♦ The fit the rip fence, guide the connecting screw
8b
through the connecting piece
8a
and the rip
fence .
♦ Screw the lock nut onto the connecting
screw
8b
.
♦ Fit the rip fence onto the appliance using the
fastening screw .
♦ Undo the lock nut and set the desired width .
♦ Retighten the lock nut .
♦ Ensure that the plane is applied with lateral
pressure .
Using the fold depth stop
♦ Fit the fold depth stop onto the appliance
using the fastening screw .
♦ Set the desired fold depth using the fold depth
stop .
♦ Repeat the planing process several times until
the required fold depth is achieved .
Removing/replacing the planing
blade (see figs . C + D)
WARNING! RISK OF INJURY
► Always remove the plug from the power
socket before working on the appliance .
CAUTION!
There is a risk of injury due to the cutting edges
of the planing blade !
Never touch the planing blade on its cutting
edges .
The planing blade has two cutting edges and
can be turned .