Parkside PEH 30 C3, Оригинальное руководство пользователя

Страница: 12 / 27

PEH 30 C3 ■ 8 │
GB
│
IE
│
NI
♦ Replace the planing blade when both cutting
edges are blunt .
♦ Do not try to sharpen the planing blade .
Turn the planing blade or replace it.
NOTE
► Do not undo the two hex socket screws .
These are used for adjusting the height of
the cutter block . Adjustment is only required
if you are using a different type of planing
blade, e .g . a rustic blade .
When changing the blade, always replace
both blades to prevent an imbalance .
► First, unscrew only one blade . This will allow
you to orient your self on the factory-mounted
second blade when reassembling later .
♦ Use the supplied open-ended spanner to
undo the 3 fastening screws for the planing
blade .
♦ Push the movable cutter block guard into
the slot in the housing .
♦ Push the clamping element upwards out of
the cutter block .
♦ Remove the tensioning plate
20a
from the clamp-
ing element . Remover the planing blade
from the clamping element .
♦ Fit either a new or turned blade in the reverse
order .
♦ Planing blades can be purchased from the
address given below (see section "Service") .
Replacing the drive belt (see fig . E)
WARNING! RISK OF INJURY
► Always remove the plug from the power
socket before working on the appliance .
♦ Remove the screws and detach the drive
belt cover .
♦ Remove the worn drive belt .
♦ Fit the new drive belt onto the small belt
wheel first and then turn the drive belt
and pull it onto the large belt wheel .
♦ Replace the drive belt cover and fix it in
place using the screws .
Maintenance and cleaning
WARNING! RISK OF INJURY
► Always remove the plug from the power
socket before working on the appliance .
♦ Keep the appliance and the ventilation slits
clean to ensure fault-free operation .
♦ Clean the chip ejector regularly .
♦ To clean a blocked chip ejector, use a suitable
tool (e .g . a piece of wood, compressed air,
etc .) .
♦ Use a dry cloth to clean the housing .
♦ Use a brush to remove any dust stuck to the
appliance .
♦ Never use sharp objects, petrol, solvents or
cleansers which can damage plastic . Do not
allow any liquids to get into the interior of the
appliance .
NOTE
► Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline .
Disposal
The packaging consists of environmentally
friendly material . It can be disposed of in
the local recycling containers .
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner .
Your local community or municipal authorities can
provide information on how to dispose of the ap-
pliance .