Parkside PDSS 310 A2, Инструкции по эксплуатации и безопасности

Страница: 55 / 71

56 GB/MT
Information about warranty and service processing Troubleshooting / Information about warranty and service processing
Troubleshooting
Note: Regular lubrication is imperative to ensure
the longest possible life for your compressed air de-
vice. We recommend continuous lubrication via the
included lubricator
11
.
After every maintenance verify the equipment
is still operating as originally.
Faults Possible causes Action
Impact driver not
working
Trigger
4
not pulled Pull trigger
4
No compressed air supply If applicable, drain condensation from tube (water
bag)
Straighten kinks in the hose
Connect compressed
2
air
Leak in compressed air
system
Remedy leak
Compressor defective Verify the compressor is supplying compressed air. If
necessary, have compressor repaired by a qualified
professional
Defect inside the air tool Have air tool repaired by a qualified professional
Not properly tight-
ening screw
Air pressure too low Increase air pressure.
ATTENTION! Never exceed the maximum ap-
proved operating pressure of the air tool!
Not loosening
screw
Torque is too low Turn torque control
3
to a higher setting
Rusted screw Apply rust remover to screw
Information about warranty
and service processing
Creative Marketing Consulting GmbH
warranty
Dear customer, the warranty for this device is 3
years from the date of purchase. In the event of
product defects you have legal rights against the
retailer of this product. Your legal rights are not li-
mited in any way by our warranty detailed below.
Warranty terms
The warranty period begins on the date of purchase.
Please keep the original sales receipt in a safe lo-
cation. This document is required as your proof of
purchase.
Should this device show any fault in materials or
manufacture within three years from the date of
purchase, we will repair or replace it - at our choice -
free of charge to you. Warranty services require
the defective device and the proof of purchase (sales
receipt) to be presented within the three-year period