Parkside PDBNP 14 A1, Инструкция по эксплуатации

Страница: 15 / 52

PDBNP 14 A1
■ 12
│
GB
│
IE
│
NI
Topping up the oil
To ensure that the rivet gun remains operational for as long as possi-
ble, make sure that there is sufficient pneumatic oil in the appliance.
The following options are available:
♦ Attach a maintenance unit with an oiler to the compressor.
♦ Install a fitted oiler into the compressed air line or the compressor.
♦ Manually add 3–5 drops of pneumatic oil from the supplied oil
container into the connecting nipple every 15 minutes of
operation.
♦ When opening the oil container for the first time, remove the
cap nut from the container. Use a pair of long-nosed pliers or
similar implement to remove the internal pipette.
♦ Turn it 180 °, replace it and screw it back in place with the cap nut.
♦ Use a needle or similar tool to poke a small hole into the tip of the
pipette to release oil.
Connecting to a compressed air source
NOTE
► Before connecting the compressed air source,
–
the correct working pressure (3–6 bar) must be fully
reached
–
ensure that the trigger is not pulled
♦ Remove the cover from the compressed air supply .
♦ To seal the thread on the connecting nipple , wrap 2 or 3 layers
of the sealing tape around it. Use the assembly spanner to
screw the connecting nipple into the compressed air supply .