Parkside PDAP 75 A1, Перевод оригинальной инструкции

Страница: 62 / 106

PDAP 75 A1
GB
│
MT
│ 59 ■
Hazards caused by flying parts
■ If a workpiece or accessory or even part of the machine tool itself
breaks, parts can be flung out at high speeds .
■ When operating the sander or the polisher or when exchanging
accessories on the appliance, always wear eye protection . The
degree of necessary protection must be evaluated separately for
each individual task .
■ Wear a safety helmet if working above head height . In this case,
the risks for others should also be assessed .
■ You must ensure that the workpiece has been securely fixed .
Hazards caused by entanglement
■ Suffocation, scalping and/or cut wounds can occur if loose cloth-
ing, jewellery, necklaces, hair or gloves are not kept away from
the machine and its accessories .
Hazards during operation
■ When using the machine, the operator’s hands can be subject to
hazards such as cuts, grazing and heat . Wear suitable gloves to
protect your hands .
■ The operator and maintenance personnel must be physically
capable of handling the size, mass and power of the machine .
■ Hold the machine correctly: be ready to counteract any normal
or sudden movements - have both hands ready .
■ Ensure that your body is balanced and that you have a secure
standing position .
■ Release the start/stop control in case of a disruption to the elec-
tricity supply .
■ Use only the lubricants recommended by the manufacturer .