Parkside PBSD 900 A1, Перевод оригинальной инструкции

Страница: 8 / 114

GB
│
IE
│ 5 ■ PBSD 900 A1
5 . Service
a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts.
This will ensure that the safety of
the power tool is maintained .
Appliance-specific safety instructions
for grinders
■ Hold the appliance by the insulated handles
as the abrasive belt can come into contact
with its own power cable.
Damage to a live
wire may make exposed metal parts of the
power tool live and could give the operator an
electric shock .
WARNING!
■ Dusts from materials such as leaded paint,
some types of wood and metal can be
harmful to your health .
■ Contact with or inhalation of these dusts can
represent a health hazard for the person
operating the appliance and other people in
the vicinity .
■ Wear safety goggles and a protective dust
mask!
Operation
Tensioning/replacing the abrasive
belt
WARNING! RISK OF INJURY!
■ Always remove the power plug from the wall
socket before carrying out any work on the
belt grinder .
1 . Loosen the clamping device for the abrasive
belt by swivelling the clamping lever all the
way out . The abrasive belt can now be
removed .
2 . Now fit a new abrasive belt or swap the
belt to work on a different material or to use
a different grain size .
IMPORTANT: The direction of the arrows on
the inside of the abrasive belt and on the
appliance housing must match .
3 . Push the clamping lever back into its initial
position .
Manually adjusting the abrasive belt
If the belt tracking is not centred when you switch
on the appliance, you may need to manually
adjust it .
♦ To do this, turn the adjusting screw on the
front roller until the abrasive belt is running
centred .
IMPORTANT: It is important to ensure that
the abrasive belt does not rub against the
housing . Check the belt tracking regularly and
adjust it with the adjusting screw if required .