PAHE 20-Li A1
GB
│
MT
│
51
■
Mounting the saw chain and blade
WARNING!
►
Wear protective gloves! There is a danger
of injury from the sharp cutting teeth!
►
The sprocket cover together with the chain
tensioning ring and the fixing screw
are not pre-assembled on the appliance at
delivery.
►
The turning of the blade is not intended by
the manufacturer.
►
The chain travel direction
on the
blade must be adhered to every assembly.
♦
Place the saw chain on the blade .
Ensure that
the saw chain is running in
the correct direction (see Fig. B).
♦
Attach the blade with the labelling facing
upwards and guide the saw chain around
the chain sprocket .
The guide rail must be above the blade
guide (see Fig. C).
♦
Put the sprocket cover on.
♦
Tighten the fixing screw slightly.
♦
Now, tighten the saw chain (see section
Tightening and checking the saw chain).
♦
Tighten the fixing screw completely.
Tightening and checking the saw
chain
WARNING!
►
Wear protective gloves! There is a danger of
injury from the sharp cutting teeth!
♦
Undo the fixing screw .
♦
Turn the chain tensioning ring in a clockwise
direction to increase the tension.
♦
The saw chain must lie against the underside
of the blade.
Check whether the saw chain can be drawn
over the blade by hand .
♦
Now tighten the fixing screw completely.
NOTE
►
A new saw chain stretches and must be
tightened more regularly.
Lubricating the chain
♦
Remove the oil filler cap .
♦
Fill the oil tank with approx. 65 ml of organic
chain oil .
WARNING!
►
Never work without chain lubrication!
If the saw chain runs dry, the cutting
equipment may become irreparably dam-
aged within a short time. Always check chain
lubrication and oil level in the tank before
starting work.
NOTE
►
Use only saw chain oil. Preferably biodegrad-
able. Do not use waste oil, motor oil, etc.
►
While working, check whether the automatic
chain lubrication is working correctly. Check
the chain lubricator before and during work.
Sharpening the saw chain
NOTE
►
You will find detailed information on
sharpening in the sharpening set, e.g. from
Oregon.
►
Alternatively, you can use an electrical saw
chain sharpening device and follow the
instructions of the manufacturer.
►
If you have any doubts about implementing the
work, the saw chain should be replaced.