Parkside AIR TOOL SET, Инструкции по эксплуатации и безопасности

Страница: 7 / 35

7 GB/IE/CY
Safety advice / Bringing into use
Safety advice
WArnIng!
read all the safety advice
and instructions . Failure to observe the safety
advice and instructions could result in serious injury
and / or damage to property.
KEEP ALL THE SAFETY ADVICE AND INSTRUC-
TIONS IN A SAFE PLACE FOR FUTURE REFERENCE!
WArnIng! DAngEr OF SUFFOCA-
TIOn! Working with nitrogen presents
a danger of suffocation!
Work in well
ventilated spaces only.
WArnIng!
DAngEr OF InJUrY!
Never exceed the maximum allowable working
air pressure of 8 bar. Use a pressure reducer
to set the working air pressure.
WArnIng!
DAngEr OF InJUrY!
never point the device at people or
animals.
WArnIng!
DAngEr OF InJUrY!
Never use oxygen or other combustible gas as
the energy source.
WArnIng! DAngEr OF InJUrY!
First disconnect the hose from the
compressed air source and only then
disconnect the compressed air supply
hose from the device.
This will ensure that
the compressed air supply hose does not wave
around or recoil in an uncontrolled manner.
J
For your own safety, wear
suitable personal protective
equipment.
J
Keep children and other people
away while you are operating
the device.
Distractions can cause
you to lose control of the device.
J
Disconnect the device from the compressed air
source before carrying out any repairs or main-
tenance of the device or moving it to another
location.
J
When removing the hose coupling, hold the
hose tightly in your hand to avoid injury
caused by the hose shooting backwards.
J
Look out for damage on the device.
Check the device for damage before bringing it
into use. Do not use the device if you discover
any defects.
J
Do not kink the device’s hose, otherwise you
may damage it.
Q
Original accessories /
attachments
J
Use only the accessories and attach-
ments detailed in the operating in-
structions.
The use of accessories other than
those recommended in the operating instructions
could lead to you being in danger of injury.
Q
Bringing into use
Q
Connecting the
compressed air source
nOTE: Operate the product only with cleaned, conden-
sate- and oil-free compressed air and never exceed the
maximum working air pressure at the device of 8 bar.
nOTE:
The compressed air source must be fitted
with a (filter) / pressure reducer so that the air pres-
sure can be regulated.
j
Connect the product to a suitable compressed air
source by connecting the quick-release coupling
of the air supply hose with the plug-in nipple
4
to
the product. It locks itself in place automatically.
Q
Using the tyre inflator gauge
2
1. Place the valve connector
5
on to the valve.
Schrader valve, car tyre valve
(e.g. often used on mountain bikes)
33355_Air Tool Set_Content_LB3 (ohne FI).indd 7 23.06.09 16:39