Parkside 307590, Перевод оригинальной инструкции

Страница: 19 / 41

PASSK 20-Li A1 GB
│
MT
│
15 ■
Rechargeable battery: PAP 20 A3
Type: LITHIUM ION
Rated voltage: 20 V
(DC)
Capacity: 4 Ah
Cells: 10
High-speed battery charger: PLG 20 A2
INPUT:
Rated voltage: 230–240 V ~, 50 Hz
(AC)
Rated power consumption: 85 W
Fuse (internal): 3.15 A
T3.15A
OUTPUT:
Rated voltage: 21.5 V
(DC)
Rated current: 3.5 A
Charging time: approx. 80 min
Protection class: II / (double insulation)
Noise emission value:
Noise measurement value determined in accordance
with EN 60745. The A-rated noise level of the
power tool is typically:
Sound pressure level:
L
PA
= 91.6 dB (A)
Uncertainty K: K
PA
= 3 dB
Sound power level: L
WA
= 102.6 dB (A)
Uncertainty K: K
WA
= 3 dB
Vibration emission value:
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 60745:
Tightening screws and nuts of maximum permis-
sible size:
a
h
= 8.65 m/s 2
Uncertainty K = 1.5 m/s 2
Wear hearing protection!
NOTE
► The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and
can be used for equipment comparisons. The
specified vibration emission value can also
be used to make an initial exposure estimate.
WARNING!
► The vibration level varies depending on the
use of the power tool and may be higher
than the value specified in these instructions in
some cases. Regular use of the power tool in
this way may cause the user to underestimate
the vibration. Try to keep the vibration loads
as low as possible. Measures to reduce the
vibration load are, e.g. wearing gloves and
limiting the working time. Wherein all states of
operation must be included (e.g. times when
the power tool is switched off and times where
the power tool is switched on but running
without load).
General power
tool safety warnings
WARNING!
► Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or seri-
ous injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.