Parklands PZT-42, Руководство оператора

Страница: 31 / 34

- 27 -
Problem
Problem Problem
Problem Possible
Possible Possible
Possible Cause
Cause Cause
Cause Corrective
Corrective Corrective
Corrective Action
Action Action
Action
Clutch
will not
engage.
1.Fuse is blown.
2.Low voltage supply at
the clutch.
3.Damaged coil.
4.Inadequate current
supply.
5.Rotor/armature airgap is
too large.
1.Replace fuse. Check coil
resistance,battery charge, charging
system, and wiring connections and
replace if necessary.
2.Check coil resistance, battery
charge,charging system, and wiring
connections and replace if necessary.
3.Replace clutch.
4.Repair or replace clutch lead wire or
electrical system. Clean connector
contacts.
5.Remove shim or replace clutch.