Parking Facilities PF9000 страница 8 Скачать руководство пользователя

Страница: 8 / 15

Parking and access control equipment manufactured in the UK

Manual Sliding Gates

Open, Close

ock

equence

Please note! when opening and closing the gate make sure the gate handle is being held at all

times, do not allow the gate to slam open or closed. Not following these instructions could

result in personal injury and/or damage to the gate.

Opening

1. Unlock the gate.

2. Twist the handle clockwise to allow the catch bolt to clear the keep.

3. Walk the gate to the fully open position ensuring there are no obstacles

blocking its path.

4. Insert the Bullet Lock into the post locking the gate open.

Remove the Bullet Lock from the post.

Walk the gate to the fully closed position ensuring there are no

obstacles blocking its path.

Push the catch bolt into the keep ensuring it has latched

correctly.

Lock the gate.

Closing

Содержание PF9000
















Результаты поиска

Содержание PF9000

Отзывы:

Похожие инструкции для PF9000

Бренды по названию

Популярные бренды

Parking Facilities PF9000, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание PF9000

Отзывы:

Похожие инструкции для PF9000

Бренды по названию

Популярные бренды