EN
| Operating manual
Shutdown and restart dryer
38
WVM 40 -1450
Restart
Restarting dryer: compressed air system and dryer under operating pressure
If the dryer was shut off: switch on the dryer by setting the main switch to I.
Otherwise:
Start the dryer (see the operating manual for the controller).
If necessary, slowly open the compressed air inlet and outlet valves installed by the
operator.
The dryer is now ready for operation and continuous automatic cycle.
If compressed air system and dryer have not remained at operating pressure
If disconnected, reconnect the voltage supply of the dryer.
Pressurise and switch on the dryer as described in the section on page 31.
The dryer is now in operation again and operates fully automatically.
Содержание Zander WVM 40
Страница 1: ...WVM 40 1450 Adsorption dryer Operating manual Revision 04 06_2018 EN Cod 398H271785...
Страница 2: ......
Страница 55: ......