XLT50-D/XLT50-S 3-AXIS STEPPER DRIVE
2
Dimensions
The overall dimensions of the drive are 141mm deep, 40mm wide (including P-clips) and
172mm high. The distance between centre fixings is 185mm and the overall height of the
flange mount is 195mm.
Mounting Information
Mount the drive vertically. Both the top 4.5mm diameter fixing hole and the bottom 4.5mm
width fixing slot should be used.
Mount the supply with a minimum free space of 50mm both below and above its case. Allow
a side clearance of 10mm free space on both sides.
Note, do not mount the supply above or close to other products which generate a significant
amount of heat by radiation or convection.
