Parker Torqmotor TF Series Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 44

background image

HY13-1527-M1/US

Torqmotor™ Service Procedure

TF, TG, TH and TL Series

Parker Hannifin Corporation

Hydraulic Pump/Motor Division

Greeneville, TN 37745 US

21

Remove end
cover &
inspect bolts

NOTE

Remove plugs
and valves

4. Remove end cover assembly (2) and seal

ring (4). Discard seal ring. SEE FIGURE 6.

NOTE: Refer to the appropriate “alternate
cover construction” on the exploded view
to determine the end cover construction
being serviced.

5. If the end cover (2) is equipped with shuttle

valve or relief valve (24) components,
remove the two previously loosened plugs
(21) and o-rings (22). SEE FIGURE 7.

CAUTION

NOTE

NOTE

CAUTION: Be ready to catch the shuttle
valve or relief valve components that
will fall out of the end cover valve cavity
when the plugs are removed.

NOTE: O-ring (22) is not included in seal
kits but serviced separately if required.

NOTE: The insert and if included the
orifice plug in the end cover (2) must not
be removed as they are serviced as an
integral part of the end cover.

Wash & inspect
end cover

NOTE

6. Thoroughly wash end cover (2) in proper

solvent and blow dry. Be sure the end
cover valve apertures, including the internal
orifice plug, are free of contamination.
Inspect end cover for cracks and the bolt
head recesses for good bolt head sealing
surfaces. Replace end cover as necessary.
SEE FIGURE 8.

NOTE: A polished pattern (not scratches)
on the cover from rotation of the
commutator (5) is normal. Discoloration
would indicate excess fluid temperature,
thermal shock, or excess speed and
require system investigation for cause
and close inspection of end cover,
commutator, manifold, and rotor set.

Remove
& inspect
commutator
ring

7. Remove commutator ring (6). SEE FIGURE 9.

Inspect commutator ring for cracks, or burrs.

Figure 9

Figure 8

Figure 7

Figure 6

Disassembly and Inspection

«
...
19
20
21
22
23
...
»

Содержание Torqmotor TF Series













































Отзывы:

Нет отзывов

Похожие инструкции для Torqmotor TF Series

Бренд: Admiral Страницы: 9

Бренд: W&H Страницы: 42

Бренд: Stihl Страницы: 40

Бренд: Kohler Страницы: 12

Vanguard Diesel 432447

Бренд: Briggs & Stratton Страницы: 24

Johnson BJ25E4SUC

Бренд: BRP Страницы: 265

Бренд: York Страницы: 40

PNEUTORQUE PT 1

Бренд: norbar Страницы: 11

Бренд: Emerson Страницы: 18

Бренд: Emerson Страницы: 124

Leroy-Somer FFB

Бренд: Emerson Страницы: 12

Бренд: MTU Страницы: 187

Бренд: Vacmaster Страницы: 12

Бренд: Haas Страницы: 7

Бренд: Wilesco Страницы: 4

Бренд: Wilesco Страницы: 2

Бренд: Wilesco Страницы: 4

Бренд: Wilesco Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды