Chapter 4: Maintaining the PowerStation
Maintaining the Touchscreen
XP Series PowerStation User Guide
4-3
Note
If the touchscreen still does not appear calibrated, and the
cursor moves vertically when your finger moves horizontally
on the screen or vice versa, the touchscreen cable may not
be connected to the motherboard properly. Call a CTC
customer service representative.
Calibrating the Touchscreen on a Windows XP PowerStation
To calibrate the Hampshire touchscreen driver under Windows 2000 and XP
Professional, complete the following steps:
1
Select
Start
J
Programs
J
Hampshire
. You may also select the
Calibrate Touchscreen
on the desktop. The Hampshire TSHARC
Control Panel appears.
2
Follow the on screen instructions for selecting which monitor to
calibrate.
3
Select the
Calibrate
tab.
4
Click the center of where the arrows are pointing. The Calibration
screen appears.
5
Touch the target where it appears on the screen, hold your finger
there until prompted to release. The screen guides you through the
Touch - Hold - Release
process.
6
Repeat the process three more times in the other three corners of the
screen. A test screen appears.
7
Move your finger across the monitor. The target should move with
your finger. If so, the calibration was successful.
8
Select
Accept
.
9
On the control panel, select
Apply
and then select
OK
.