Parker PowerStation XP Series, Руководство пользователя, Страница: 18 / 65

Chapter 2: Installing the PowerStation Installing the XP PowerStation
XP Series PowerStation User Guide
2-7
Installing the XP PowerStation
Once you have prepared the location for your PowerStation, you are ready
to install the unit. To do so, you need to mount the PowerStation to your
enclosure using screws and metal clamps in what is called a bracket
assembly .
The bracket assembly contains a mounting clamp with “feet”, a screw, and
for 15” units, a nut as shown in Figure 2-1.
Figure 2-1: Mounting Clamp
The mounting clamps secure to the PowerStation using a sliding
mechanism. You must slide the feet of the mounting clamp into the
appropriate slot on the PowerStation.
There are four styles of clamps used to mount the PowerStation to your
enclosure depending on the display size. To mount the PowerStation
properly, refer to the instructions below that corresponds with the display
size you are using.
For your convenience, all necessary mounting hardware is included with
the unit.
Mounting a PowerStation With a 6” Display
If you are mounting a PowerStation with a 6” display, complete the
instructions below:
1
Slide the PowerStation into the cutout from the front.
2
Attach the 4 mounting clamps, with their screws to the back of the
unit in the spaces provided. You will place 2 clamps on the top and
bottom of the unit.
The clamps secure to the unit using the sliding mechanism shown in
Figure 2-2.
Feet on the Mounting
Clamp