background image

 
 

 

http://www.parker.com/ppf

  

Page 7 

 
IV. BACKGROUND 

In 1977, Dr. R.E. McCaman and associates 
provided a complete description (1) of a pressure 
ejection system that utilized a high speed valve. 
This valve continues to be the heart of the pressure 
system offering very precise control of ejection 
volumes (in the picoliter range) and ejection times 
(in the millisecond range). 
 
Furthermore, these investigators described a series 
of holders that permitted ejection through 
micropipettes with sufficiently small tips that could 
be used for simultaneous intracellular recordings 
during ejections. 
 
These systems have been used for intracellular as 
well as extracellular ejections. In listing advantages 
of the pressure system, these investigators 
emphasize that the linear relationship between 
ejection volume and either duration of the pulse or 
of the applied pressure permits a rapid, convenient 
and reliable calibration of each pipette (1, 3), unlike 
that for electrophoretic techniques (7-9). 
 
Pressure ejection seems an ideal approach to 
delivering uncharged substances such as peptides 
(4, 6), steroids (4), and enzymes (2,5). The 
solutions used for pressure ejections are usually 
several orders of magnitude more dilute than those 
used for electrophoretic ejection (1, 3), thus 
avoiding receptor desensitization commonly 
experienced with iontophoresis. The fact that the 
ejection efficiency of the pneumatic systems is not 
influenced by solute concentration nor by net 
charge, makes them ideal for intracellular injections 
of radiolabeled or tracer substances (13-15). 
Thus, pressure systems have been used for 
intracellular injection of radiolabeled precursors or 
neurotransmitters (10, 11) and [H3] –sugars as 
precursors of glycoproteins (12) in order to study 
neuron-specific transmitter biosynthesis, axonal 
transport and cellular topography. The reproducible 
and quantifiable ejections obtained with pressure 
systems make them ideal for neuropharmacological 
studies of agonist and drug interactions with 
membrane receptors (1, 3, 4). 
 

 

As you find additional uses for your Picospritzer, 
please send us a reprint for addition to our reference 
section so that others may benefit from your 
experience. 
 
N.B.; H3=radioactivity (tritium) label substance. 
 

REFERENCES 

References describing the use and unique advantage 
of pressure systems in several types of 
experimentation in the field of neurobiology, cell 
biology, and biophysics are: 
 
1.   McCaman, R.E., Mc Kenna, D.G. and Ono, J.K. 
“A pressure system for intracellular and extracellular 
ejections of picoliter volumes.” Brian Research 
136:141 (1977). 
 
2.   Sakaki, M., Sakai, H. and Woody, C.D. 
“Intracellular staining of cortical neurons by pressure 
micro-injection of horseradish peroxidase and 
recovery by core biopsy.” Exp. Neurol. 58:138 
(1978) 
 
3.   Sakai, M., Swartz, B.E. and Woody, C.D. 
“Controlled micro release of pharmacological agents: 
measurements of volume ejected in vitro through fine 
tipped glass microelectrodes by pressure.” 
Neuropharmacol. 18:209 (1979) 
 
4.   Dufy, B., Vincent J-D. Fluery, H., Pasquier, P., 
Gourdji, D., and Tixler- Vidal, A. “Membrane effects 
of thyrotropin-releasing hormone and estrogen shown 
by intracellular recording from pituitary cells.” 
Science. 204.509 (1979) 
 
5.   Tauc, L., Hoffman, A., Tsuji, S., Hinzen, D. and 
Faille, L. “Transmission abolished in a cholinergic 
synapse after injection of acetylcholinesterase into 
the presynaptic neuron.” Nature, 250, 496 (1974) 
 
6.   Chang, J.J., Gelperin, A., and Johnson, F.H. 
“Intracellulary injected aequorin detects 
transmembrane calcium flux during action potentials 
in an identified neuron from the terrestrial slug.” 
Brain Research 77:431 (1974)

 

 

Содержание PICOSPRITZER III













Отзывы: