Parker Hannifin Corporation
Hose Products Division
Wickliffe, OH
10
Crimping Machine
PHastkrimp
Bulletin 4480-T15-US
Hose Insertion Depth
Hose by
Fitting Series
Dash Size
26
43
70
71
73/78
81
-4
13/16" 13/16"
-5
13/16" 15/16"
-6
13/16" 1-1/8"
1-1/16"
1-1/16"
-8
13/16" 1-5/16" 1-5/16"
1-1/4"
-10
7/8"
1-9/16"
1-3/8"
1-5/16"
-12
7/8"
1-1/2"
1-1/2"
1-7/16" 1-7/8"
1-1/8”
-16
1"
1-3/4" 1-13/16"
1-3/4"
2"
1-1/4”
-20
1-7/8"
1-13/16"
1-5/16
1. The Hose Insertion Depth Fixture can be
used to mark the insertion depth on the
hose.
2. Push the hose all the way into the
coupling to the insertion depth mark. Do
not use lubricant to assemble spiral
hose and fittings.
3. Remove pin from inside pusher unit
so pusher will swing back. Lubricate
the die bowl cavity to prevent wear.
Note: See Hose Insertion Depth table at the right.
Important: Hose assemblies must be inspected for
cleanliness and free of all foreign particles.
Note: Parker Hannifin will not accept responsibility for the
operation of, or provide warranty coverage for, a crimper
that is operated by a power unit other than equipment
supplied by Parker Hannifin for the express purpose of
operating the designated crimper.
4. Place unitized die-train place. See decal
on crimper for proper die set.
Note: Die sets are color coded by size.
5. Position the hose and fitting in dies from
below.
6. Rest bottom of coupling
on die step using PARKALIGN
®
feature.
7. Place the die ring on top of the dies.
See decal on crimper for proper
die ring; Silver or Black.
PARKALIGN
®
FEATURE
Crimping Instructions for 26, 43, 70, 71, 73, 78 and 81 Series
8. Position pusher and re-place pin. Push
and hold the “down” button until die ring
fully contacts crimper bowl.
9. Push and hold the “up” button until
pusher retracts to release finished
hose assembly.
Crimping Instructions
www.comoso.com
