Parker Phastite PH-10-4N-TMS, Руководство по установке

Страница: 21 / 35

25
24
Preparing Phastool
®
for Installation
Phastool
®
- Vice Mounted
When Phastite does not need to be assembled in-situ it is recommended that the Phastools’ supplied vice plates are
used to mount the tool securely in a bench vice.
This assembly process supports both Phastool® 3A and Phastool® 3B
1. Locate supplied vice plate (1 of 2) onto the tool (Figure 23).
2. Each vice plate has two mounting holes.
3. Install the retaining cap screws to secure the vice plate to the tool and repeat for vice plate 2 of 2 (Figure 24).
Figure 19
Figure 23
Quick and easy interchangeable tooling inserts allows the
Phastool
®
to install connectors from sizes 1/4” to 5/8”. The
insert selected is determined by the type of connector to be
used and the size of the tubing. All inserts are etched with the
part number and are color coded.
The two inserts are installed on the moving side of the tool
and the fixed side of the tool (Figure 26).
1. One insert is installed on the moving jaw side of the hand
tool (Figure 26). This is the side closest to the hand tool
- hose interface.
2. The other insert is installed on the fixed jaw side (Figure
26). The fixed jaw is opposite the hand tool - hose
interface.
Selecting Phastool
®
Inserts
Phastool
®
3A - Portable
When operating the Phastool 3A by hand it can be used in any orientation, however it is recommended that the
supplied boot is used.
1. Place and slide supplied boot onto the tool (Figure 19).
2. The boot has four mounting holes - two on each side.
3. Install the retaining screws to secure the boot to the tool using a 3mm Allen key (Figure 20).
Phastool
®
3B - Portable
When operating the Phastool 3B by hand it can be used in any orientation, however it is recommended that the
supplied handles are used.
1. Locate supplied handle (1 of 2) onto the tool (Figure 21).
2. Each handle has two mounting holes.
3. Install the retaining screws to secure the handle to the tool and repeat for handle 2 of 2 (Figure 22).
Figure 20
Figure 22 Figure 21
Figure 24
Installing Inserts on the Phastool
®
1. If the hand tool is being picked up, do not pick it up by
the hose. This will damage the fitting to hose interface.
2. Ensure the jaws and inserts are free from damage or
foreign objects.
3. Correct insert orientation is essential to correct assembly
of Phastite
®
connectors, ensure that the dimples are
orientated left and right (not up and down) (Figure 25).
4. For all inserts except the SHAPES, ensure that the tube
slot is orientated upwards (Figure 25).
5. The inserts slot in and out of Phastool
®
3A and Phastool
®
3B, and click into place (Figure 26).
Figure 25
Phastool ® Insert/Fitting Table
Fixed
Jaw
Style
Moving
Jaw
B B
Shapes A
Shapes A
A A
A A
n E
D
Tube
O.D.
Bore
ØE
D
B
C
A
F A/F
A
B
n F
n
E
C
D
Bore Tube
O.D .
Table 19
Figure 26