Parker LINKnet AC30P, Руководство по установке оборудования

Страница: 38 / 176

4-16
Installation - Power Stack
AC30 series Variable Speed Inverter
DC
LINK FED POWER STACK – Y-CAP DISCONNECT
With the front panel removed, link CN1 is accessible on the DC link filter PCB. The link can be removed to disconnect the Y-capacitors across the
DC link from earth (CN1):
It may be required to do this in system applications where there are RCD’s in circuit or where the inverter is installed on an IT supply.
Note: The removal of the Y-cap disconnect is mandatory where the inverter is deployed in an AFE application.
WARNING
Disconnection of the EMC filter invalidates the CE EMC Declaration. The product becomes a component for incorporation and the
conformity of the complete equipment or installation becomes the responsibility of the installer.
Refer to ‘Appendix A: Compliance’ for more information on conducted emissions EMC compliance.
Note: When link is fitted it should be across pins 1 and
4 on the connector, as shown above.
CN1