Parker LINKnet AC30P, Руководство по установке оборудования

Страница: 114 / 176

8-28
Safe Torque Off
AC30 series Variable Speed Inverter
Channel B Fault Check:
STO test Comprehensive Check, Activity Expected reaction and effect
14
Ensure the drive is running and the motor is turning at SPT1.
Disconnect terminal X10/03 for approximately 5 seconds (must exceed 3 seconds).
Motor must immediately coast to rest.
Drive must report STO trip immediately.
X10/05 and /06 must remain OFF.
15
The STO function has latched in hardware to disable the drive.
Re-apply 24V to terminal X10/03, and then try to restart drive.
Drive must not start.
Drive must continue to report STO trip.
X10/05 and /06 must remain OFF.
16 Remove and re-apply all power to the drive X10/05 and /06 must be OFF.
17 Try to restart drive at SPT1.
Drive must start at SPT1.
X10/05 and /06 must remain OFF.
18 Stop the drive.
Drive must decelerate to rest.
X10/05 and /06 must remain OFF.
User Output Check:
STO test Comprehensive Check, Activity Expected reaction and effect
19 Remove connections to X10/01 and X10/03 within 1 second of each other. X10/05 and /06 must be ON.
20
Try to restart the drive.
Wait for at least 10 seconds with the run command active, then remove it.
Drive must not start while run command is given.
Drive must report STO trip immediately.
X10/05 and /06 must remain ON.
21 Reconnect X10/01 and X10/03 to 24V. X10/05 and /06 must turn OFF immediately.
22 Try to restart the drive at SPT1.
STO trip must clear.
The drive must restart at SPT1.
23
Stop the drive.
Test is complete.
Drive must stop.
The tests specified above are the minimum set; further test steps may be required depending on the application, for example a controlled stop should be
verified in a SS1 application.