Parker LINKnet AC30P, Руководство по установке оборудования

Страница: 167 / 176

Technical Specifications - Control Module
F-1
AC30 series Variable Speed Drive
Appendix F:
Technical Specifications - Control Module
ENVIRONMENTAL DETAILS
Operating Temperature
Operating temperature is defined as the surrounding air temperature of the drive, when the drive and other equipment
adjacent to it is operating at worst case conditions.
NORMAL DUTY (ND): 0
°
C to 40
°
C, derate up to a maximum of 50
°
C
HEAVY DUTY (HD): 0
°
C to 45
°
C, derate up to a maximum of 50
°
C
Output power is derated linearly at 2% per degree centigrade for temperature exceeding the maximum rating for the
drive.
Maximum operating temperature of the AC30D in the 24V dc supplied operating mode, without power applied to the
stack, is 45
°
C.
Storage Temperature -25
°
C to +55
°
C
Shipping Temperature
-25
°
C to +70
°
C
Product Enclosure Rating IP20 – remainder of surfaces (Europe)
UL (c-UL) Open Type (North America/Canada)
Altitude If greater than 1000m above sea level, derate by 1% per 100m to a maximum of 2000m
Humidity Maximum 85% relative humidity at 40
°
C non-condensing
Atmosphere Non flammable, non corrosive and dust free
Climatic Conditions Class 3k3, as defined by EN60721-3-3
Chemically Active
Substances For the standard product (which inherently includes our optimal level of conformal coating) compliance with EN60721-
3-3 is as follows –
a) Both classes 3C3 and 3C4 for hydrogen sulphide gas (H
2
S) at a gas concentration of 25ppm for 1200 hours.
b) Both classes 3C1 (rural) and 3C2 (urban) for all nine defined substances as defined in table 4.
Classes 3C1 and 3C2 are valid for both storage and transportation purposes.
Note: Product was tested and validated with a hydrogen sulphide environment of 25ppm for a continuous period of
1200 hours and validated throughout the test period without failure.
Vibration Test Fc of EN60068-2-6
10Hz<=f<=57Hz sinusoidal 0.075mm amplitude
57Hz<=f<=150Hz sinusoidal 1g
10 sweep cycles per axis on each of three mutually perpendicular axis