13
Supply voltage
6 Installation
Instruction book, IQAN- LC6-X05
Supply voltage
W
ARNING
Before any installation of an IQAN system can take place, make sure the ignition lock
is turned off and the battery is disconnected.
Emergency stop
Make sure an
Emergency Stop
disconnecting the system power supply, is easily
accessible at any time. The IQAN module and standalone controller instruction books
show how to connect an emergency stop.
Connecting of supply voltage, IQAN module
The supply voltage, should be within the operating range, see Appendix A, on page 17.
Connect the supply voltage to POWER +5Vdc, pin C1:5, C1:7 and C2:4. The regulated
5Vdc is supplied from an IQAN module’s +VREF. The ground connection is made
from GND pin C1:1, C1:3 and C2:1 to the IQAN module’s -VREF.
N
OTICE
Maximum load for the
VREF
position is different between types of IQAN modules.
Refer to the appropriate instruction book.
N
OTICE
Do not exceed power supply limits for the joystick base and handle!
Reversed polarity, or supply voltage different from recommended operating conditions
will seriously damage the unit, see Appendix A, on page 17.
EXAMPLE
Connecting an IQAN-LC6-X05 to IQAN module.
+5 Vdc
GND
IQAN module
+VREF
-VREF
LC6-X05