Parker EME
Packaging, storage, transpor
9
192-550002N10 ETH March 2019
1.5.5.
Safety Instructions for Operating Personnel
Any work step that has a negative effect on the operating safety of the linear
motor module must be omitted.
Operating and supervisory personnel are required to check the linear actuator or
machine at least once per shift for externally visible damage or defects. Changes
that have occurred (including the operating behavior) that could have a negative
effect on the operating safety must be reported immediately.
Components and accessories are designed especially for this product. When
purchasing spare and wearing parts, use only original Parker parts. We note here
explicitly that we are unable to check or release spare parts or accessories that
were not provided by us. Installing and/or using such products may cause
negative changes in the required design properties in some circumstances, which
in turn could negatively effect the active and/or passive operating safety of the
product.
Depending on the operating conditions (rotation speed, load, etc.) increased
surface temperature in the area of the drive may occur. When touching it during
operation slight injuries from burning may occur. Don't touch the product during
operation. At maintenance, service and repair always take care that the product is
cooled off before starting work.
The manufacturer is unable to accept any liability for damage caused by using
non-original parts and accessories.
Safety and protection devices are strictly NOT to be removed or bypassed or set
out of order.
Applicable requirements and national accident prevention regulations must
always be observed when installing and operating our linear motor module.
1.6
Packaging, storage, transport
First check
Check the packaging for damages.
Remove all items from the packaging.
Do not discard the packaging; it is strongly recommended to use the original
packaging material for return deliveries.
Depending on the storage location, metal surfaces may have a temperature of
0 °C or below. Please provide appropriate worker protection (e.g. protective
gloves).
Please ensure that the consignment does correspond to your order.
Check the product for damages. Do never use a device which seems damaged.
Please read the installation manual carefully before installing or commissioning
the device.
Packaging material
The packaging material is inflammable, if it is disposed of improperly by burning,
lethal fumes may develop.
Transport
Make sure to transport the linear module always in a safe manner and with the aid
of suitable lifting equipment (Means of transport).
Storage
The linear module must be stored evenly and without any mechanical load.
The stated storage temperature must be adhered to.
For a storage period longer than 1 year, the linear module must be relubricated
before commissioning, see lubricating intervals and relubrication quantity.
