Parker EME
Applications in accordance with the Regulations
7
192-550002N10 ETH March 2019
1.4
Applications in accordance with the Regulations
The incomplete machine can only be set in operation if it is sure that the machine
in which the incomplete machine shall be mounted is conform to the 2006/42/EG
machine directives.
Without further measures the product is not suitable for safety-oriented tasks. The
linear actualor must only be used in areas that are not accessible to persons during
operation.
If the linear actuator is used in areas accessible to people, it must be installed in
such a manner that no one can be endangered during operation.
The described safety, installation and operating instructions must be adhered to.
General functioning consists in converting a rotational movement in a linear
movement without slip within the product related load limits.
Can be found in the catalogue http://www.Parker.com/Literature/Electromechanical
Europe/Literature/190_550017_ETH_katalog.pdf.
Its applications are in industry and trade.
The linear actuator is used for: Positioning, transporting, feeding, removing, pallet
handling, loading, unloading, processing and manipulating as well as testing work
pieces or tools. Since the component can be used in a very wide range of
applications, the user is responsible for its use in specific applications.
1.4.1.
Applications not in accordance with the intended use
For risks of applications not in accordance with the intended use, the user shall
bear the sole responsibility. Parker Hannifin does not accept any liability for
damages caused by applications not in accordance with the intended use of the
product.
1.5
For Safety Use
1.5.1.
General hazards
General Hazards on Non-Compliance with the Safety Instructions
The subsystem has been designed in accordance with state-of-the-art technical
developments and is operationally reliable. If it is not operated by qualified or at
least trained personnel or if it is operated improperly or not in accordance with the
operating instructions, however, the unit may bear the risk of hazards.
Electronic, moving and rotating components can
cause danger for life and limb of the operator or third persons and / or
cause material damage
If the linear actuator is installed in a machine plant, the safety requirements noted
in the operating instructions for that machine must be combined with those
described in this manual.
1.5.2.
Identifying Residual Dangers and Hazardous Areas
If there are still residual dangers present to persons or property from the linear
actuator in spite of operating it in a safe manner, the user must make reference to
these residual dangers through signs and written rules requiring appropriate
procedures.
The following safety signal words are used:
Indicates that an imminent hazardous situation may lead to death or serious
bodily harm if not prevented using appropriate safety measures.
Indicates a potentially hazardous situation which, if not avoided using appropriate
safety measures, could result in serious or minor injury.
Indicates a potentially hazardous situation which, if not avoided using appropriate
safety measures, may result in minor injury or material damage.
Provides important information about the product, how to handle the product or
about the part of the manual to which particular attention must be paid.
