412LXR Series Product Manual
Chapter 3 - How to Use the 412LXR
27
Cabling
The 412LXR is available with two (2) types of cabling:
•
Cable Transport Module
•
This is a complete cable management system including high flex ribbon cable (life rating of 20
million cycles), cable carriers, and connector system. This has been engineered for high life,
maintenance free operation. Extension cables are used to connect the table connector block to the
amplifier and controller. Refer to cabling diagrams for pin-out and wire color information.
•
The Cable transport module is replaceable. See Chapter 6, Cable Management Module
Replacement, for replacement P/N’s and a detailed procedure of the replacement process.
•
Un-harnessed OEM Cable System
•
This option provides high flex round cables directly from the carriage. This option is provided for
applications where the design of the machine already has a cable management system. Four
cables come from the carriage connector: motor, encoder/Hall effect, limit/home sensor and
auxiliary cables.
•
Recommended bend radius for these cables is 100mm. This radius will provide 10 million cycles of
the cable. Smaller bend radius will reduce cable life while larger bend radius will increase life. The
un-harnessed OEM cable system can be replaced. Refer to Chapter 6, Cable Management Module
Replacement. The same carriage connector is used here and can be removed and replaced with a
new assembly.