Parker ChemTec II, Инструкции по установке, эксплуатации и обслуживанию

Страница: 33 / 68

33
Front Display & Back Panel Interface
ChemTec II front panel display
A 7” resistive, touch screen color LCD which responds to use with standard disposable lab gloves and/or a
stylus. All modes, settings, and recipes are displayed on this screen. The image shown is the default screen
when initially connected to power.
ChemTec II back panel interfacing ports
•
Printer: ChemTec II can be connected to a PC for data collection or to a Parker purchased Printer via the
female DB9 RS-232 port labeled “Printer” with the included RS-232 to USB Adapter. Alternatively, the
Printer Kit (PN 080-095A) can be connected here.
•
Electronic Balance: Male DB9, labeled “S1”, “S2” and “S3”.
•
CAN In/Out: Male DB9 for CAN communication cables (not enabled).
•
Profibus: Female DB9 for Profibus communication cable (not enabled).
•
SciPres II Single-Use Pressure Sensors: Three (3) Amphenol connectors labeled “P1, P2, P3”, one for
each pressure sensor.
•
Scales: Male DB9 connectors labeled “S1”, “S2” and “S3” are RS-232 ports for electronic scales.
•
Analog: Female DB25 for Analog Input or Output. 8 inputs and 4 outputs exist.
•
Digital: Female DB25 for Digital Input or Output. 8 inputs and 8 outputs exist.
•
USB: Three USB “B” connectors for loading / saving of recipe files.
•
Ethernet: Used for connection to the ChemTec II via a LAN. (not enabled.)
•
Relay 1 and 2: Three Output relays for control of other devices on each as well as 24 VDC Outputs.
•
T1, T2, and T3: These ports are unassigned at this time and not enabled.