Parker ChemTec II, Инструкции по установке, эксплуатации и обслуживанию

Страница: 32 / 68

32
To start the process:
Select recipe from list, press EXECUTE.
The pH Control Run Screen shows the ongoing process. The PRIME button can be used to prime lines, once to
start, and again to stop. To control the process:
•
Select START to begin the process
•
Once the process starts, select PAUSE (once Pause is activated it will switch to RESUME)
•
Select RESUME to begin the process again from where it was first paused
•
Select STOP to end the process
If ALARMS is selected from this screen, the Alarm States will appear to indicate that while this process is
actively running, data is being sent and can be captured on SciDoc II software.
Refer to APPENDIX A for tubing dimensions chart and available flow rates based on tubing and motor size.