Bulletin HY25-1380-M1/US
Owner’s Manual
Parker Hannifin Corporation
Chelsea Products Division
Olive Branch, MS 38654 USA
21
Installation Instructions
Mounting the P.T.O. on the Transmission
2. Remove the gasket and clean the aperture
surface (
Fig. 2).
NOTe: Do not reuse the gasket that comes with the
transmission.
3. Using a screwdriver, install the guide pins until
they bottom out (
Fig. 3) (see
page 34
).
NOTe: Do not use sealing compounds because
they are generally incompatible with automatic
transmission fluid.
4. Install the special gasket over the guide pins. The
ribbed surface should face outward, toward the
installer (
Fig. 4).
NOTe: To ensure proper backlash and sealing of
the P.T.O. to the transmission, only use Gasket
furnished with the P.T.O.
When installing a P.T.O., always wear protective
clothing and safety glasses.
1. Remove the P.T.O. aperture plate with a 16mm
socket (
Fig. 1).
Caterpillar
Fig. 4
Fig. 1
Fig. 2
Fig. 3
