Parker AQUA DUO - A455C, Техническое руководство

Страница: 51 / 81

51
FWF, running, FWP); and timers. Press the CYCLE button once to view this menu and CYCLE
again to scroll through the menu items.
Every time CYCLE is pressed, the next item is shown. If you release, and do not push the CYCLE
button for more than 5 seconds, you will return to the main screen.
1.
Pre-Filter Press – Inlet pressure in Bar or PSI (pre-filter inlet)
2.
HP Inlet Press – Inlet pressure in Bar or PSI (high pressure pump inlet)
3.
Membrane Press – Membrane pressure in Bar or PSI
4.
Product Flow – Product water flow in l/min or GPM
5.
Brine Flow – Brine flow in l/min or GPM
6.
Water Quality – Salinity (water status) in ppm
7.
Total Hours – High pressure pump/ETD hour meter (counted in seconds but shown in whole
hours)
8.
Tank Full – Yes or no
9.
Tank Empty – Yes or no
10.
Booster Relay - Booster pump on or off
11.
FWF Relay – Fresh Water Flush on or off
12.
HP Relay – High pressure pump on or off
13.
DV Relay – Diversion valve on or off
14.
UV Relay – Ultraviolet on or off
15.
Supply Voltage – volts (used only for diagnostics)
16.
Version – software version
Configuration (Change) Menu
This menu shows a list of configuration parameters that can be changed by the operator. Press
the CYCLE button and hold for 5 seconds to view this menu and CYCLE again to scroll through
the menu items. Every time CYCLE is pressed, the next item is shown. Holding the CYCLE button
for more than 5 seconds selects the displayed menu item. Note that this menu does not allow
the operator to monitor the state of these configuration parameters. Please use the
Configuration (Read) Menu to do so.
1.
Unit – units (metric or US)
2.
Low Pressure 1 Inst – S1 Lo pressure sensor installed (yes or no)
3.
Low Press 2 Inst – S2 Lo pressure sensor installed (yes or no)
4.
Prod Flow Inst – Product flow meter installed (yes or no)
5.
Brine Flow Inst – Brine flow meter installed (yes or no)
6.
Tank Full Inst – Tank level full sensor installed (yes or no)
7.
Tank Empty Inst – Tank level empty sensor installed (yes or no)
8.
FWF Delay – High pressure pump stop to FWF delay (HH:mm:ss)
9.
Time to AutoShut – Auto shutdown after X hours in state FWP (HH:mm:ss)
10.
AutoShut Time – Auto shutdown after time (yes or no)
11.
AutoShut Tank – Auto shutdown on tank full (yes or no)
12.
FWF Duration – FWF duration time (HH:mm:ss)