Parker Hiross Antares ATT060, Руководство пользователя

Страница: 20 / 272

English
4 / 14
ATT060-090
Y
IMPORTANT: wait for the dryer to perform the complete cycle
of regeneration, IT IS ABSOLUTELY PROHIBITED TO STOP THE
FLOW OF AIR UNTIL THE STOP OF THE DRYER.
Mode stop “FORCED”.
Press
to enter on “Main Menu”
- - -Main Menu - - -
START/STOP
USER SETTINGS
SERVICE
INFORMATION
Select START/STOP
press Enter to confi rm
- - -Main Menu - - -
START/STOP
USER SETTINGS
SERVICE
INFORMATION
Select “Stop Directly”
Press Enter to confi rm
- On/Off Menu -
NORMAL START/STOP
STOP DIRECTLY
Select YES and confi rm.
After few second the value return
to “
NO” .
FORCING SYSTEM OFF
NO
Y
IMPORTANT:
Machine ON: the machine should always work under pressure.
Machine OFF: do not allow air to fl ow into the tanks with the dessi-
cant when the machine is turned off.
4.6 Language selection
Select USER SETTINGS
Press Enter to confi rm
- - -Main Menu - - -
START/STOP
USER SETTINGS
SERVICE
INFORMATION
Select Language
Press Enter to confi rm
- User Settings Menu -
DRYER SETTINGS
DATE/TIME
BMS
MOISTURE DRAIN
OTHER
LANGUAGE
Using UP and DOWN
select the language.
Press Enter to confi rm
LANGUAGE SELECTION
English
4.7 Precautions during commissioning and operation
!
During expansion, the air is expelled from the silencer:
- the unit is performing the step of “generating”;
- risk of projection of material (small particles of dust, fragments...) and
noises.
Is required to perform the start-up wearing appropriate personal protec-
tive equipment(see table 1 para.1.4).
!
RISK CAUSED BY SUDDEN DEPRESSURIZATION!
Do not remove components of the dryer or perform other manipulations
when the system is under pressure.
Before performing any work on the dryer depressurize the system.
!
DO NOT CHANGE THE DEFAULT OF ELECTRONIC CONTROL
CARD.
5 Control
5.1 Control panel
5.1.1 Display
5.1.2 Keys
KEY PHOTO FUNCTION
UP Shifts the cursor or increases the value
of a parameter
DOWN Shifts the cursor or decreases the value
of a parameter
ENTER Shifts the cursor from the parameter to
another or confi rm a parameter
PRG Enables access to the menu for select-
ing the group of parameter
ESC Cancel an operation
ALARM Shows alarms on the display, switches
off the buzzer (if activated) and reset
alarms.