Park House Healthcare Endeavour, Руководство по обслуживанию

Страница: 9 / 16

Service Manual
– Endeavour
Page9
Assembling of the base cover:
1. Attach the front and back cover,
2. Attach the middle cover,
3. Lower the support column covers,
4. Screw the fastening support column screw.
4.4. Replacing the support column
Disassembling the support column:
1. Unplug the power cord from the mains socket
2. Remove the middle cover of the base, and front or back cover, depending on which column is
disassembled (point 4.3),
3. Remove the terminal socket cover in the electric control box
4. Disconnect the power cord supplying the column from electric control box,
5. Cut the insulation grip holding the column cable,
6. Support the bed frame from falling after disassembling,
7. Lower the section above the disassembled column,
8. Unscrew 4 M8 hexagon bolts [1] fastening bed frame to the column,
9. Unscrew M8 screws [2] fastening aluminum column holder to the base of the bed,
10. Loose 3 M6 internal wrenching hexagonal bolt [3] on the column holder [5],
11. Lower bed frame gently and pull out the column with caution.
12. Put the bed frame on the support.
13. Remove the column protection and column holder.
1
4
3
5
2
6