Pari eFlow rapid, Инструкция по эксплуатации, Страница: 19 / 282

eFlow
®
rapid - 2021-04 15
en
4
PERFORMING INHALATION
• Sit in an upright position and relax. This
makes inhaling easier and improves
uptake of the medication in the airways.
• Hold the nebuliser handset in your
hand.
• Hold the mouthpiece between your
teeth and enclose with your lips. The
lips must not touch the blue expiratory
valve.
• Press the ON/OFF button on the con-
troller to start the inhalation session.
A green LED next to the ON/OFF button
lights up and an audible signal (1 beep) is
emitted to indicate readiness for use.
• Inhale and exhale slowly and deeply
through the mouthpiece. Hold the
mouthpiece in your mouth while breath-
ing out as well.
Do not breathe through your nose. You
can use a nose clip if necessary.
Pausing during inhalation
If it is necessary to interrupt the inhalation
session briefly, activate Pause mode:
• Press the ON/OFF button for approx.
1 second.
Pause mode is activated when the LED
flashes green.
• Press the ON/OFF button for approx.
1 second again to resume the inhalation
session.
If pausing for a longer time, switch the
controller off by pressing the ON/OFF but-
ton for approx. 2 seconds.
As long as there is enough liquid in the
medication reservoir, nebulising can be
restarted by pressing the ON/OFF button
again.
CAUTION:
Hold the nebuliser handset horizontally
all the time while performing the inhala-
tion. If the handset is tilted, errors in the
dosage may occur.
Info:
It is normal for aerosol to escape
through the expiratory valve in the
mouthpiece during exhalation; this
is not a malfunction.
Info:
Pause mode can only be activated
after an operating time of a few
seconds.