Technical manual-C190CubetapePRO
21
3.
.
Figure 3-2
Figure 3-3
•
Click on
“
Detect
”
and Cubetape Manager will find the connected Cubetape and both
Cubetape and Cubetape Manager will display
“Connected.” See Figure 3
-3.
3.3.4 Configure the CubetapePRO via Cubetape Manager Software
This subsection discusses the various settings managed through Cubetape Manager.
•
The “Read” button is used for reading the existing configuration in Cubetape. It
should be used to load an existing configuration from the connected Cubetape into
Cubetape Manager.
•
To load the existing configuration to the Cubetape Manager, click the File on
menu and then click Load Configuration. See Figure 3-4.
•
After the configuration, the current setting can be saved as one “.xml” file which
can be load to another Cubetape. Click Save Configuration.
•
The “Write” button is
used to write a new configuration to Cubetape, it should
be selected after configuration by PC and before disconnecting the USB cable.
Note that the new configuration is only available on the CubetapePRO
after writing.
•
After clicking on the “Write” button
, the writing process starts and ends
with a confirmation window
