Technical manual-C190CubetapePRO
13
2.
2.4.2 Weigh
The CubetapePRO can record the weight from supported scales via Bluetooth.
This application only works in “batch” mode. The weight data is stored in a record
along with barcode, dimensions and other information. The records needs by
uploaded by the “Batch Upload”
operation to a PC with CargoDesk software.
Pair with a weighing scale first. Chapter 4 Section 4.5 for instructions and
information.
•
Use
and
to scroll, when the cursor is on the Weigh tab, press
to select.
Figure 2-8
•
The display will be redirected to the first step in the Weigh workflow.
The Weigh workflow is similar to the Measure application.
See Section 2.4.1 for more details.
•
Keep the goods on the scale before scanning the barcode label on the goods.
After scanning the barcode the weight is automatically received as shown
on Figure 2-8. Press
to accept / continue.
•
After the dimensioning process, the record will be saved automatically.
Note: In order to receive weight from the scale, Cubetape must be connected.
If the scale is not connected, the warning shown in Figure 2-9 will be displayed.
Please check the connection and pair again if required.
If the scale cannot respond to the Cubetape, the display would stay on the
capturing screen, see the Figure 2-10. Please check the configuration on the
scale.
