Paravan WHEELCHAIR Series Скачать руководство пользователя страница 94

Страница: 94 / 160

Gener

Information

epar
e

Oper
ate

Help

Technology

Loading and transporting the power wheelchair

DANGER

Possible risk of injury or serious injury or death! Do not move

the vehicle:

While the wheelchair is being moved into position in the

Docking Station

If the wheelchair and the wheelchair user are not properly

secured.

If the warning tone sounds and/or the red warning lamp

(LED) in the control panel flashes or lights up!

Always check that the locking plate is properly locked in the

Docking Station by trying to pull the wheelchair out of the

Docking Station before driving. (It must not be possible to

drive the wheelchair backwards out of the Docking Station

without pressing the red release button on the control panel).

Содержание WHEELCHAIR Series

































































































































































Результаты поиска

Содержание WHEELCHAIR Series

Отзывы:

Paravan WHEELCHAIR Series, Руководство по эксплуатации, Страница: 94 / 160

Результаты поиска

Содержание WHEELCHAIR Series

Отзывы: