Paravan WHEELCHAIR Series Скачать руководство пользователя страница 49

Страница: 49 / 160

Gener

Information

epar

Oper

ate

Help

Technology

Handover of the power wheelchair

Handover of the power wheelchair

8.1

Receiving your new power wheelchair

Check your power wheelchair for completeness and compare the items received with

the delivery with your order documents. If anything is unclear, contact PARAVAN GmbH

immediately!

Check (visually inspect) that the power wheelchair is in proper condition. Report damage

which can be attributed to delivery or transport immediately and in writing to your

dealer, forwarding agent or medical supply store

and

PARAVAN GmbH.

)

See section “1.1 Your manufacturer”

8.2

Your power wheelchair is supplied to you in accordance with this

procedure

The power wheelchair is supplied to you in the following ready to drive and ready to

operate condition:

Fully assembled and with equipment corresponding to your specifications upon

ordering.

All attachments and control elements are preset to your body measurements in

accordance with the order.

Precharged storage batteries.

Содержание WHEELCHAIR Series

































































































































































Результаты поиска

Содержание WHEELCHAIR Series

Отзывы:

Paravan WHEELCHAIR Series, Руководство по эксплуатации, Страница: 49 / 160

Результаты поиска

Содержание WHEELCHAIR Series

Отзывы: