Paravan WHEELCHAIR Series Скачать руководство пользователя страница 108

Страница: 108 / 160

Gener

Information

epar
e

Oper
ate

Help

Technology

Controls

108

15.1.13 Adjust display brightness, automatic (recommended)

Fig. 74: Setting the display brightness

The display brightness is automatically adjusted to lighting

conditions by the factory. Menus may be arranged slightly

differently, depending on the software version.

Select the program function:

Press and hold the “hazard lights” key.

Select “Auto Backlight” from the settings.

By moving the joystick “

←

Left/Right

→”, select

“On/Off”.

To save, quit the menu.

15.1.14 Adjust display brightness

Select the program function:

Press and hold the “hazard lights” key.

Select “Back lighting” from the settings.

Move the joystick “

←

Left/Right

→”

to select the intensity of the

lighting (0 to 100% in 10% increments)

To save

→

quit the menu.

Fig. 75: Autom. display brightness

Содержание WHEELCHAIR Series

































































































































































Результаты поиска

Содержание WHEELCHAIR Series

Отзывы:

Paravan WHEELCHAIR Series, Руководство по эксплуатации, Страница: 108 / 160

Результаты поиска

Содержание WHEELCHAIR Series

Отзывы: