Paravan WHEELCHAIR Series Скачать руководство пользователя страница 75

Страница: 75 / 160

Gener

Information

epar

Oper

ate

Help

Technology

Loading and transporting the power wheelchair

14.

Loading and transporting the power wheelchair

The power wheelchair must always be shut down and correctly secured or

fastened for transport in the vehicle. When loading the power wheelchair,

loading aids such as

ramps, lifts and hoists

with sufficient load-bearing capacity must be used.

14.1

Rules for loading wheelchairs

The following rules must be observed for and during loading:

The maximum support height specified on the ramp must be greater than the height

from the ground to the support edge to be cleared (e.g. in the case of a car, the car

boot area).

Check the loading capacity of the ramp(s), of the lift or the hoist.

Due to safety reasons, the power wheelchair may only be loaded into cars or on split

ramps when unoccupied (without baggage or a person).

Loading may only be carried out by a person who can safely operate and control your

power wheelchair.

A power wheelchair which is unfit to drive may only be loaded by your authorised

specialist workshop. This workshop is the only entity aware of the possible danger

situations and how to counter them.

Содержание WHEELCHAIR Series

































































































































































Результаты поиска

Содержание WHEELCHAIR Series

Отзывы:

Paravan WHEELCHAIR Series, Руководство по эксплуатации, Страница: 75 / 160

Результаты поиска

Содержание WHEELCHAIR Series

Отзывы: