CHAPTER 7
PART LIST
7-1 INTRODUCTION.
This chapter lists all parts that are contained in the
Pakhammer. The parts list is used to identify and
locate all repair parts, including all attaching hardware
supplied. The parts should be ordered by part number
when ordered from Paratech Incorporated, 1025
Lambrecht Road, Frankfort, Illinois 60423-1648.
7-2 LIST OF MAJOR COMPONENTS.
A list of the major components by the
Manufacturer's Model or Identification Number is
provided in Table 7-1.
Table 7-1. List of Major Components
CID, RIC
Or Unit
Number
Quantity
Component
Name
Page
No.
550610
550030
550640
550660
550670
1
1
1
1
1
Handle Assembly
Oiler & Hose Assy.
Shuttle Valve Assy.
Piston Assy.
Tool Retainer Assy.
7-2
7-2
7-2
7-2
7-2
7-3 PARTS LIST TABLES.
Pakhammer parts are listed in t ables 7-2 and 7-3,
with major sub-assemblies listed in table 7-1. The
tables contain five columns which are described below:
7-3.1 FIGURE AND INDEX NUMBER COLUMN.
This column shows the figure and index number of
each part listed. Tables 7-2 and 7-3 relate to
illustrations contained in chapter 6; figure numbers 6-
1 and 6-2 respectively. Table 7-4 is a manufacturer
code to name list. The index numbers which identify
the individual parts are separated from the figure
numbers by a hyphen. Index numbers in each table
run consecutively.
7-3.2 DESCRIPTION COLUMN.
The DESCRIPTION column describes each part (by
noun name and modifiers) in sufficient detail for clarity.
Descriptions are successively indented to the right to
show assembly and part relationship.
7-3.3 QUANTITY COLUMN.
Quantities specified in the QUANTITY column are the
total number of each part required per assembly.
7-3.4 CAGE COLUMN.
The assembly and parts are identified by a five digit
code. These code numbers are in accordance with
Federal Supply Cataloging Handbook H-4-1. A cross
reference between these codes and the
manufacturer's is shown in table 7-4.
7-3.5 PART NUMBER COLUMN.
The part number column contains an identifying
number for each part listed. Vendor numbers are
shown where applicable.
7-4 LIST OF MANUFACTURERS.
A list of all manufacturers' code numbers used in the
parts list is shown in table 7-4. These codes are in
accordance with Federal Supply Cataloging Handbook
H-4-1.
7-1
